- 全部
- 产品名称
- 关键词
- 产品型号
- 产品摘要
- 产品描述
- 全文搜索
简体中文
2.4G
BT5.0 and above
Bouffalo Lab
1T1R
Select
UART/GPIO/I2C/PWM/ SDIO
Product Name
BL602C-20-Q2I IoT Module J102L-R
BL602C-20-Q2I
2.4G Wi-Fi
SDIO/UART
1T1R
BLE5.0
25.0 X 31.0mm
Details Information
Introduction
Fn-Link J102L-R is a wireless module based on WiFi + BLE single chip SOC BL602C, which can meet the requirements of low power consumption and high performance IOT. The core processor BL602C integrates the baseband and MAC design of 2.4G WiFi (802.11b/g/n) and BLE 5.0.The micro-controller subsystem consists of a low-power 32-bit RISC CPU, cache and memory.
With advanced power management unit, Fn-Link J102L-R support a variety of low power consumption modes. The program can be downloaded and burned directly through UART.
Features
General
802.11b/g/n compatible WLAN.
Wi-Fi Security WPS / WEP / WPA / WPA2 Personal / WPA2 Enterprise / WPA3.
Wi-Fi fast connection with BLE assistance.
PHY Features
72.2Mbps transmit and receive PHY rate using 20MHz bandwidth.
Support STA and SoftAP, STA+SoftAP and sniffer modes.
MCU Features
32-bit RISC CPU with FPU
RAM 276KB
ROM 128KB
Flash 2MB
Build-In 32KHz RTC
Host Interface
Support UART Interface
Support PWM Interface
Bluetooth Features
Wi-Fi and BLE coexistence.
Bluetooth® Low Energy 5.0.
BLE 5.0 Channel Selection#2 is supported.
Block Diagram
Parameters
Model No. | J102L-R | Main Chipset | BL602C-20-Q2I |
Interface | Wi-Fi：SDIO/UART BT：UART | Bluetooth Standard | BLE5.0 |
Data Rate | 72.2Mbps | Certification | RoHS,REACH |
RF Antenna | On-board Antenna | OS Supported | Android/Linux |
Operating Frequency | 2.400 ～2.4835GHz | Operating Voltage | 3.3V |
Dimension | L25.0 *W31.0 *T3.50mm | RF Chain | 1T1R |
Operating Temperature | -20°C to 85°C | Storage Temperature | -55°C to 85°C |
Ordering Information
Part No. | Description |
FGJ102LRX-00 | BL602C-20-Q2I /802.11b/g/n/ WiFi + BLE 5.0, 1T1R , UART, antenna on board, 25mm*31mm,finished product. |
Product Name
BL602C-20-Q2I IoT Module J102L-R
BL602C-20-Q2I
2.4G Wi-Fi
SDIO/UART
1T1R
BLE5.0
25.0 X 31.0mm
Details Information
Introduction
Fn-Link J102L-R is a wireless module based on WiFi + BLE single chip SOC BL602C, which can meet the requirements of low power consumption and high performance IOT. The core processor BL602C integrates the baseband and MAC design of 2.4G WiFi (802.11b/g/n) and BLE 5.0.The micro-controller subsystem consists of a low-power 32-bit RISC CPU, cache and memory.
With advanced power management unit, Fn-Link J102L-R support a variety of low power consumption modes. The program can be downloaded and burned directly through UART.
Features
General
802.11b/g/n compatible WLAN.
Wi-Fi Security WPS / WEP / WPA / WPA2 Personal / WPA2 Enterprise / WPA3.
Wi-Fi fast connection with BLE assistance.
PHY Features
72.2Mbps transmit and receive PHY rate using 20MHz bandwidth.
Support STA and SoftAP, STA+SoftAP and sniffer modes.
MCU Features
32-bit RISC CPU with FPU
RAM 276KB
ROM 128KB
Flash 2MB
Build-In 32KHz RTC
Host Interface
Support UART Interface
Support PWM Interface
Bluetooth Features
Wi-Fi and BLE coexistence.
Bluetooth® Low Energy 5.0.
BLE 5.0 Channel Selection#2 is supported.
Block Diagram
Parameters
Model No. | J102L-R | Main Chipset | BL602C-20-Q2I |
Interface | Wi-Fi：SDIO/UART BT：UART | Bluetooth Standard | BLE5.0 |
Data Rate | 72.2Mbps | Certification | RoHS,REACH |
RF Antenna | On-board Antenna | OS Supported | Android/Linux |
Operating Frequency | 2.400 ～2.4835GHz | Operating Voltage | 3.3V |
Dimension | L25.0 *W31.0 *T3.50mm | RF Chain | 1T1R |
Operating Temperature | -20°C to 85°C | Storage Temperature | -55°C to 85°C |
Ordering Information
Part No. | Description |
FGJ102LRX-00 | BL602C-20-Q2I /802.11b/g/n/ WiFi + BLE 5.0, 1T1R , UART, antenna on board, 25mm*31mm,finished product. |
